Speciale acties viskajaks, laatste stuks OP=OP!
Magazijn vandaag open 10:00 - 12:00 , 13:00 - 18:00

Clipper kano 16′ PROSPECTOR



Kanocenter

Kanocenter
Kanocenter
Kanocenter
Clipper kano 16′ PROSPECTOR

€ 2 955,00 incl btw
Dit product kunt u enkel verkrijgen op bestelling


   

Niet voorradig
€ 2 955,00 incl btw
In winkelmandje
Contacteer ons over dit product

Omschrijving

The 16′ Clipper Prospector is one of a series of traditional-style Prospector canoes offered by Clipper Canoes. All three Clipper Prospector models share the same characteristics of classic design, grace on the water, and maneuverability.

The 16′ Prospector is molded close to the lines of the 16′ wood canvas Prospector formerly built by the Chestnut Canoe Co. This model is available in four different layups. It is frequently ordered with a wood trim finish, which is the crowning touch to its traditional look. Webbed contoured ash seats are standard, hung from the gunnels on wood dowels. On our aluminum trim models the seats are hung on fiberglass hangers. It is easy to paddle this canoe solo by using the front seat while facing the stern. Seats are high enough for kneeling or an optional footbrace can be ordered.

OPTIONS & FEATURES

Standard Features: 

Options:

Wood Web Seat
Vinyl Gunnel Covers
Flotation Tanks
Black Trim Package
Bow & Stern ThwartsWood Trim Package

Foam Thigh Pads

Wilderness Lash System

Contoured Yoke

Expedition Spray Skirt


SPECIFICATION

Dimensions


Weight:


Length: 15′ 9″ - 480 cmFiberglass: 70 lbs - 32 kg
Beam: 35″ | 33″ (@ 4″Waterline) - 88.9 - 83.8 cmKevlar®/Duraflex: 62 lbs - 28 kg
Bow Height: 21″ - 53.3 cmPrice
Stern Height: 21″ - 53.3 cmFiberglass:€2.955,-
Center Height: 15″ - 38.1 cmKevlar®/Duraflex:€4.295,-

Fiberglass canoes are laminated by hand using a high-grade isothalic resin. Each Clipper canoe is reinforced in the bow and stern with a minimum of two layers of Kevlar®, providing extra strength and abrasion resistance needed in these areas of high stress. Flotation tanks are glassed-in at both ends of the canoe in all layups, and are filled with bagged foam for added flotation.

Three hull stiffening methods are used. The Escape, Scout, Cascade, Tripper, Tripper S, Packer and Solitude are stiffened with foam cross ribs. Foam ribs are resined to the hull and covered with biaxle glass roving, resulting in a light, durable canoe.

In the Yukon, Ranger and Prospector series, multiple layers of directional glass are used for hull stiffening, resulting in a slightly heavier weight than crossrib stiffening, but is less expensive and is a stronger layup. The Whitewater II, 17′ and 18′ Jensen, Sea Clipper, and the MacKenzie series come standard with a vacuum-bagged foam core.

Kevlar® Duraflex is a laminate designed to be exceptionally tough. It has no foam core or ribs. The hull is stiffened by up to ten layers of structural material. A minimum of four layers are used in side walls, close to the gunnels. A highly flexible resin is used to allow the laminate to elongate under extreme force. A Kevlar® Duraflex laminate may be gelcoated but will add up to 4+ pounds. The Duraflex layups will easily outperform plastic canoe hulls of the same shape. Not only will Kevlar® Duraflex be as tough or tougher, it will also retain its shape after years of use and is also considerably lighter.

Cookiebeleid
Deze website maakt gebruik van cookies. Als u verder surft, geeft u Kanocenter toelating om deze cookies te gebruiken. Opgelet, het blokkeren van bepaalde cookies verhindert het correct functioneren van deze website.